بۆ جارا دووێ ئاگەهداریا گشت كومپانیێن بسپۆر د بوارێ دابینكرنا ئامیرێ لابورێن ئەندازیاری دا دکەین ب هەبوونا سەرئێك كێمكرنەكێ بۆ دابینكرنا فرنەكا سۆتنا كونكریتی بۆ كولیژا ئەندازیاری – پشكا شارستانی ل زانكۆیا دهۆك و لدویڤ سالۆخەت و مەرجێن پێشكێشكرنێ ئەوێن ل خوارێ دیاركری:
١. پێدڤیە ئۆفەر ب دینارێ عیراقی بهێتە پێشكێشكرن
٢. دیاركرنا ماوێ دابینكرنێ.
٣. دیاركرنا ژێدەرێ (منشأ) یێ چێكرنا ئامیرەی.
٤. ماوێ دلنیابوون و سەخبێریێ (چمان و صیانە) ئێك سالە.
٥. دویماهیك رۆژ بۆ پێشكێشكرنا ئۆفەران، رۆژا بێنجشەمبی رێكەڤتی ٣/٣/٢٠٢٢
بۆ زانین ئۆفەر دێ ل سەرۆكاتیا زانكۆیا دهۆك – رێڤەبەریا پێداویستی و لابۆرا هێنە وەرگرتن.
The requirements of Electric Furnace
- Internal Dimension of Rectangular Horizontal Furnace is (depth = 0.4 m, width = 0.4 m, Length = 1.4 m) as shown in Figure below.
- Temperature sensor rated up to (1200°C)
- Temperature increase rate of 6 or 10°C/min in order to follow up the temperature-time standard curve like ISO834 or JIS A 1304.
- Have the data logger.
- The furnace door must be opened from the top.
- For the inside of the furnace, a good quality (soft) fire brick to be used.
- insulated with inswool sheet or cement board between firebrick and metal box and also set it at top of furnace below the top door.
- Set two steel rollers inside the furnace to avoid contact of sample with the furnace body.
- Set Temperature controller inside control box.
- The furnace should have two small openings in order to input Thermocouples K Type wires to be able to measure the temperature of core and surface of specimen.
- Furnace should set be on wheels to have a flexibility of moving.
- Outer cover furnace body is to be made from water proof Galvanised metal sheet of 3 mm thickness.
- Maintenance period.