Academic Staff

                                        Yaman Sami Shareef
Yaman Sami Shareef Director of Research Center at the College of Engineering
Lecturer
Structural Engineering
    • Ph.D. Structural Engineering, Swinburne University of Technology, Melbourne, Australia, 2015.  
    • M.Sc. Structural Engineering, University of Duhok (UoD) Duhok, Kurdistan Region IRAQ, 2008.  
    • B.Sc. Civil Engineering, University of Duhok (UoD) Duhok, Kurdistan Region IRAQ, 2003. 
  • https://orcid.org/0000-0002-4688-1881
    Journals
    1. Al-Kamaki Y., Al-Mahaidi R., and Bennetts I. 2016. Strengthening of Heat-damaged RC Columns using CFRP Sheets. Journal of Composites for Construction, Submitted. 
    2. Al-Kamaki Y., Al-Mahaidi R., and Bennetts I. 2016. An experimental investigation of the behavior of heat-damaged RC columns confined with CFRP fabrics using photogrammetry. Materials and Structures Journal, DOI: 10.1617/s11527-016-0873-x.
    3. Al-Kamaki Y., Al-Mahaidi R., and Bennetts I. 2016. An experimental investigation of the behavior of heat-damaged RC columns confined with CFRP fabrics using photogrammetry. Materials and Structures Journal, Accepted. 
    4. Al-Kamaki Y., Al-Mahaidi R., and Bennetts I. 2015. Experimental and    numerical study of the behavior of heat-damaged RC circular columns confined with CFRP fabric. Composite Structures Journal, Volume 133, Pages 679-690. 
    5. Al-Kamaki Y., Al-Mahaidi R., and Bennetts I. 2015. Strength model for heat-damaged RC circular columns confined with CFRP fabrics. Journal of Reinforced Plastics and Composites, Volume 34, Pages 1833-1855. 
    6. Al-Kamaki Y., Al-Mahaidi R., and Mohammed A. 2014. Behaviour of concrete damaged by high temperature exposure and confined with CFRP fabrics. International Journal of Civil Engineering and Technology (IJCIET), Volume 5, Issue 8, Pages 148-162.  
    7. Mohammed A. K., and Shareef Y. S. 2013. Flexural analysis of axially restrained thin Ferrocement slab strips. International Journal of Engineering Science and Innovative Technology (IJESIT), Volume 2, Issue 6, Pages 115-128. 
    8. Mohammed A. K., and Shareef Y. S. 2011. Tests on axially restrained Ferrocement slab strips. J. Duhok Univ. Vol. 14, No.1 (Pure and Eng. Sciences). 
    Conferences
    1. Al-Kamaki Y., Al-Mahaidi R., and Bennetts I. 2017. Strengthening of heat-damaged concrete cylinders under load. Austroads Bridge Conference 2017, Submitted.
    2. Al-Kamaki Y., Al-Mahaidi R., and Bennetts I. 2015. Behavior of concrete after exposure to elevated temperatures. In: Proceedings of the 27th Biennial National Conference of the Concrete Institute of Australia in conjunction with the 69th RILEM Week conference, 30 August 2015-2 September 2015, Melbourne, Australia. 
    3. Al-Kamaki Y., Al-Mahaidi R., and Bennetts I. 2014. The use of image correlation photogrammetry in investigating the performance of fire damaged circular RC columns strengthened with CFRP. In: Proceedings of the 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23), 19-12 December 2014, Byron Bay, Australia, Pages 1141-1148.  
    4. Al-Kamaki Y., Al-Mahaidi R., and Bennetts I. 2014. Confinement of heat-damaged RC circular columns using CFRP fabrics. In: Proceedings of the 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23), 19-12 December 2014, Byron Bay, Australia, Pages 477-482.  
    5. Al-Kamaki Y., Al-Mahaidi R., and Bennetts I. 2014. Effectiveness of CFRP strengthening of fire-damaged concrete. In: Proceedings of the 7th International Conference on FRP Composites in Civil Engineering (CICE 2014), 20-22 August 2014, Vancouver, Canada, Paper no. 356. 
    6. Al-Kamaki Y., Al-Mahaidi R., and Bennetts I. 2014. Strengthening of fire-damaged bridge columns using CFRP fabrics. In: Proceedings of the 7th International Conference on Bridge Maintenance, Safety and Management (IABMAS 2014), 7-11 July 2014, Shanghai, China, Pages 855-862.  
    7. Al-Kamaki Y., and Al-Mahaidi R. 2013. Compressive strength of concrete damaged by elevated temperature and confined by CFRP fabrics. In: Proceedings of the fourth Asia-Pacific Conference on FRP in Structures (APFIS 2013), 11-13 December 2013, Melbourne, Australia, Paper no. 77. 
    Posters

     

    1. Al-Kamaki Y., and Al-Mahaidi R. 2012. Strengthening of fire damaged RC columns using CFRP fabrics. PG Research Conference, 16 November 2012, Swinburne University of Technology, Melbourne, Australia. Abstract and poster presentation. Poster presentation awarded “Honorary Mention for Poster Presentation”.
    Theses
    1. Al-Kamaki Y. 2015. Strengthening of fire-damaged RC columns using CFRP fabrics. PhD. thesis, Swinburne University of Technology.
    2. Shareef Y., S., Flexural Behavior of Axially Restrained Ferrocement One-Way Slabs, M.Sc. thesis, University of Duhok, 2008. 

    • FRP strengthening of heat damaged RC columns under preload using CFRP fabrics.
    • FRP strengthening of exterior post-tensioned band beam to column connections under earthquake loading.
    • Anchorage systems in large scale post tensioned beams strengthened in shear with carbon fibre.
    • Torsional strengthening RC beams using NSM FRP technique.
    • Performance enhancement of Alkali-Aggregate reaction damaged concrete columns using fibre reinforced polymers composites.
    • Strengthening RC beams using NSM FRP technique during and after fire exposure.

  • Swinburne University of Technology, Faculty of Science, Engineering and Technology, Swinburne University of Technology, Melbourne, Australia

    Position: Lecturer (Part-time) 01/2014- 11/2015

    Responsibilities: Prepared and delivered lectures to undergraduate students, Conducted discussion groups, Prepared, administered and marked exams, tests and papers to evaluate students' progress.

    Teaching commitment:  Structural Mechanics (Strength of Materials)

    Position: Tutor (Part-time) 03/2014- 7/2017 

    Responsibilities: Prepared and delivered tutorials sessions to undergraduate students, Assisted in preparation of examinations, graded examinations, term papers, Organized reference materials, visual aids and other materials as required by the lectures.

    Teaching commitment:  Structural Mechanics (Strength of Materials)

    Position: Lab Demonstrator (Part-time) 08/2013- 11/2016 

    Responsibilities: Prepared and delivered lab sessions to undergraduate students, Assisted in graded examinations, term papers and laboratory reports, Organized reference materials, visual aids and other materials as required by the lectures.

    Teaching commitment:  Structural Mechanics (Strength of Materials) 

    Position: Lab Demonstrator (Part-time) 08/2013- 11/2013

    Responsibilities: Prepared and delivered lab sessions to undergraduate students, Assisted in graded examinations, term papers and laboratory reports, Organized reference materials, visual aids and other materials as required by the lectures.

    Teaching commitment: Solid Mechanics (Structural Analysis)

     

    University of Duhok, Civil Engineering Department, Duhok-Kurdistan Region-Iraq

    Positions: Lecturer (Full -time) 11/2016- present

    Responsibilities: Prepared and delivered lectures to undergraduate students, Conducted discussion groups, Prepared, administered and marked exams, tests and papers to evaluate students' progress.

    Teaching commitment: Engineering Mechanics.

    Positions: Assistant Lecturer (Full -time) 11/2008- 05/2011

    Responsibilities: Prepared and delivered lectures to undergraduate students, Conducted discussion groups, Prepared, administered and marked exams, tests and papers to evaluate students' progress.

    Teaching commitment: ● Mechanics of Materials ●Strength of Materials ●Building Materials ● Concrete Design ● Final year projects.

    Zakho Technical Institute, Zakho-Kurdistan Region-Iraq

    Position: Lecturer (Part -time) 10/2010- 05/2011                        

    Responsibilities: Prepared and delivered lectures to undergraduate students, Conducted laboratory sessions and discussion groups, Prepared, administered and marked exams, tests and papers to evaluate students' progress.

    Teaching commitment: Surveying Engineering

    Akre Technical Institute, Akre-Kurdistan Region-Iraq 

    Position: Lecturer (Part -time) 12/2016- present                         

    Responsibilities: Prepared and delivered lectures to undergraduate students, Prepared, administered and marked exams, tests and papers to evaluate students' progress.

    Teaching commitment: Surveying

  •   +964 750 473 9502
      yaman.alkamaki@uod.ac

  • Download